Rock Pi 4 Model C+ 4GB RK3399T (mit Dualband 2,4/5GHz WLAN/Bluetooth 5.0) MicroHDMI

Rock Pi 4 Model C+ 4GB mit Dualband 2,4/5GHz WLAN/Bluetooth 5.0, 2x Micro HDMI

Rockchip RK3399TProcessor64bithexacoreprocessor

Dual Cortex-A72, frequency1.5GHz oc to 2GHz with quad Cortex-A53, 1.4Ghz os to 1.6GHz with separate NPU NEON coprocessor

GPU

Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11.

Memory LPDDR4

64bit dual channel LPDDR43200Mb/s, 4GB

Storage eMMCmodule

Optional industrial compatible high performance eMMC module, 8G/16G/32G/64G/128G available

MicroSD card

uSD slot supports up to 128G uSD card

M.2 SSD

M.2 connector supports up to 2T M.2 NVME SSDPower supply needs to be 5V/5A

Display HDMI

Micro HDMI2.0 up to 4k60 Type D, H.265/VP9 HEVC hardware decode

Micro HDMI2.0 up to 2k60 Type D, H.264 hardware decode
Peripherie

Display MIPI DSI

MIPIDSI 4 lanes display via FPC connector

Two of HDMI/HDMI2/MIPI DSI can work at the same time,support mirror or extend mode.

Camera MIPI CSI

MIPICSI 2 lanes via FPC connector, support up to 8MP camera

Audio

Audio 3.5mm jack with mic with improved mechanics

HD codec that supports up to 24-bit/96kHz audio

Output can drive 32Ohm head phones directly

USB 3.0 OTG x1

USB 3.0 HOST x1

USB 3.0 OTG port x1 upper one

hardwareswitch for host/device switch, upper one

USB 2.0 HOST x2

Ethernet GbE

Network

Wireless 802.11 ac wifi2,4/5GHz

Bluetooth 5.0

LAN

GbE LAN with PoE support

additional HAT is required for powering from PoE

IO 40-pinexpansionheader :

- 1 x UART

- 2 x SPI bus

- 2 x I2C bus

- 1 x PCM/I2S

- 1 x SPDIF

- 1 x PWM

- 1 x ADC

- 6 x GPIO

- 2 x 5V DC power in

- 2 x 3.3V power pin

Others

Power switch

Dual-pin PWM fan strip controller chip onboard

Power supply USB-C recommended 5V/5A

Size 85mm x 54mm

NOTE: Mechanically fits many of the existing Raspberry Pi 4 accessories.

Size 85mm x 54mm